User Guide

Hinting
519
Here are the mnemonics that are used to represent commands. A detailed
description of each command and its parameters will follow.
AlignTop
Align a point to the top alignment zone
AlignBottom
Align a point to the bottom alignment zone
Align
Align a point to the grid
SingleLinkH,
SingleLinkV
Single Link commands in horizontal and vertical directions
DoubleLinkH,
DoubleLinkV
Double Link commands in horizontal and vertical directions
InterpolateH,
InterpolateV
Interpolate commands in horizontal and vertical directions
MDeltaH, MDeltaV
Middle Delta commands
FDeltaH, FDeltaV
Final Delta commands
Click on the More>> button to expand the panel:
In expanded mode you see the command options panel in the bottom.
Select the command and use the controls in that area to change the
command parameters. Click the Apply button after you make changes to
accept them.