User Guide

FontLab 4
288
Scale
Enter the scaling factor and select a center point of transformation.
Use the Uniform option to scale proportionally.
Slant
Enter the slant angle (degrees, positive value slants to the right) and
select a center point.
Mirror
Enter the direction of the mirror axis and select the center point of
the transformation. Use the buttons to mirror horizontally or
vertically quickly.
Press the Apply button to apply the transformation to the selected area.
If you press the
button the Transform dialog box will open (see the
“Transformations” chapter below). Pressing this button is the same as
cho0sing the Tools>Transform command. If you press the
button the
previous transformation action will be repeated. It is the same as choosing
the Tools>RepeatTransformation command.