User Manual

8
Water Treatment
With Fontanella, the water is ltered and delivered Still Ambient, Cold, Sparkling or Hot.
Caution: Fontanella is designed to use only drinkable water coming from municipal
water supply. The manufacturer declines any responsibility in case of non-drinkable
water or of water not controlled by the water authority. Any warranty will be deemed
void in this case.
The water treatment cycle is divided into three stages:
(1) Pre-Filtration
The inlet water goes through a fabric lter that retains deposits and rougher suspended
solids that could obstruct the second stage of the ltration system.
(2) Filtration
Water coming from the pre-ltration system goes through a composite lter that reduc-
es the bacterial count, eliminates suspended particles, chlorine and organic substanc-
es.
(3) Cooling / Heating / Carbonation
The treated water is then dispensed at either the same inlet temperature (still ambient
water), chilled (cold still water), the addition of CO2 (cold sparkling water), heated (hot
still water), or through the coffee dispenser (hot coffee).
OPERATION OF FONTANELLA
Power On
Plug in Fontanella to mains power inlet. Turn on the Main On / Off Switch at the back
of the Fontanella. Then switch on the unit with the ON/OFF Button located on the top
right of the unit. You will notice that the LED in the Control Scroll will light up Blue or
ash RED according to the symbol on which it is positioned.
Start Up is now complete. Wait at least 15 minutes for the ICE Bank to reach desired
cooling temperature. The Fontanella is now ready for use.