Forme - User Manual

Water or Coffee Selection

The built-in system has 4 possible selections as seen below, with programmable doses

(see paragraph “User Programming”):

To select and activate, turn the Control Scroll until you reach the desired icon of the

desired beverage and press the Push Button once, located over the Control Scroll.

Note: Please press the Push Button continuously for Hot Water supply.

Control Scroll Beverage Icon

Still Ambient Water Chilled Water Hot Water Coffee

User Programming

This section will show how to modify and set some parameters of the dispenser, such

as the quantity of water or coffee to be supplied every time the Push Button on the

Control Scroll is pressed.

Note: For safety reasons, it is not possible to set a desired amount of Hot Water.

To dispense hot water, a continuous pressure on the PUSH Button located over the

Control Scroll is required.

Setting Doses for Still Ambient Water, Cold Water, and Hot Coffee

To adjust and set the amount / dose of Still Ambient Water, Cold Water and Hot

Coffee, select the desired icon / beverage by rotating the Control Scroll, press and

maintain a continuous pressure on the Push Button. Fontanella will commence dis-