Operation Manual

46
G BG B
G BG B
G B
BLITZ
IMPORTANT!
The clamping pads of the 4 vices are patented.
The vice clamping pads (“4” - Fig. 09-07) have special
innovative technical features that will be described
below.
When positioning the vices, it is important that the
arrow printed on the pad is always facing upwards
(perpendicular to the worktable).
09-07
4
HORIZONTAL VICES
Undo release handle “1” - Fig. 09-06 to adjust vertically and rotate the vice cylinder.
Undo release handle “2” - Fig. 09-06 to adjust the vice cylinder horizontally.
N.B. Each horizontal vice is fitted with a safety valve defined as the non return valve. If the air pressure in the
circuit fails for any reason, this valve keeps the vices closed.
When the compressed air supply returns all the machine functions are restored.
WARNING
Before every cutting operation, the profiles must ALWAYS be clamped using the vices on the left and
right of the blade
Tap “3” excludes (as required) the external horizontal vice.
09-06
2
3
1