Operation Manual

45
BLITZ
G BG B
G BG B
G B
09-03
09-04
09-05
1
2
2
1
OK
NO
9.3 VICE - POSITIONING / ADJUSTMENTS
There are 3 threaded holes on the machine heads for
positioning the vices (“1-2-3” - Fig. 09-03).
When positioning the vices the following factors must
be taken into consideration:
- Blade exit.
- Diameter and configuration of the profile to be cut
(the operation described below)
PLEASE NOTE
The vices MUST NEVER come within the cutting range
of the blades (as shown in Figs. 09-04 and 09-05).
3
3