Operation Manual

22
G BG B
G BG B
G B
BLITZ
5.2 CHECKS
- Check that the place where the machine is installed does not have any areas in shade, that there are no
glaring lights, or dangerous strobe effects (reflections-reverberation) due to the type of lighting used in the
workshop where the machine is to be used.
- Check that the machine has not been damaged during transit.
- Check that the machine rests evenly on the floor.
- Check that there is enough free space around the machine to completely open all the doors and in order to
carry out all maintenance operations easily.
5.3 MACHINE POSITIONING AND INSTALLATION
Having selected the location, the machine can then be installed.
5.3.1 RELEASING THE HEADS
To release the hoods on the heads, remove the relative fixing brackets “A” - Fig. 05-03.
To remove each of the 2 brackets undo the relative 4 fixing nuts “B” - Fig. 05-03. The 4 brackets removed
(2 on each head) will later be used for fixing the machine to the ground.
A
05-03
B