Installation Instructions

When more access is needed or to encourage ow of less “slippery”
ice:
1. Lock gate at higher level by pulling up and holding SmartG AT E at
correct level, and pushing tapered end of catch into nearest hole in
gate (catch will automatically release when you pull up).
2. To release catch, pull up on SmartGATE.
Using ice probe tool accessory
Ice probe tool is an optional accessory that can be ordered directly from
Follett. If your bin has been ordered with ice probe tool accessory, mount
probe for easy access on either side of bin in bracket provided.
Using probe
If there is adequate ice in bin but lower door area is not lled with
ice, it may be that ice has congealed in bin and cannot ow. This can
often be remedied by quickly jiggling SmartGATE several times (Fig.2).
If problem continues, probe tool can be inserted through rectangular
openings in SmartGAT E and agitated back and forth to break up
congealed ice mass (Fig.3).
Note: Use probe tool only as described above. To avoid possible injury,
keep head and face clear of lower door area and tool at all times. Do not
use probe tool for other purposes.
Technical assistance available toll free
Should you have any questions concerning installation or maintenance of Follett ice storage bins, please call
our technical service department at 800 523 9361 or [phone] (US & Canada) between 8 a.m. and 5 p.m. Eastern
time and in Poland [phone].
Cleaning
Interior of bin must be cleaned and sanitized prior to use and should be cleaned on routine basis during use.
Interior bin care
Follett single door upright ice storage bins with SmartG AT E are equipped with polyethylene liner walls and stainless steel
bottoms which should be cleaned and sanitized periodically with any product suitable for use in a food zone.
Important: Follett Corporation recommends installing a properly-sized, activated carbon (charcoal) water lter on
water supply to icemaker to remove chlorine.
1. Remove upper inspection windows by sliding windows to one side. Grasp the end of the front window and pull toward
you as the window is slid to the opposite side. Repeat for rear window.
2. Wash bin walls, hopper, access door plate and partition (if any), rinse and sanitize.
Exterior bin care
Exterior stainless steel surfaces can be cleaned with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish
or equivalent.
3
rear window
front window
Fig. 2
Fig. 3