Spec Sheet

Single door uprights
9140-201912 | © Follett LLC
Specification
Maximum bin capacity see model table below
W1 Width see model table below
D1 Depth 31.00" (78.7 cm)
D2 Depth with lower door assembly
(easily removed for installation
access)
39.00" (99.1 cm)
D3 Depth with door fully extended 49.50" (125.7 cm)
H1 Height (adjustable) see model table below
H2 Bin sill height 19.00" (48.3 cm)
Required door access see model table below
L1 Drain 1.00" FPT, center of bin bottom
Ice compatibility cube ice, flake ice and Chewblet ice
Shipping weight see model table below
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
Ice storage bin to be Follett
®
model __________ with
industry-exclusive SmartGATE ice shield. Bin to hold approximately __________lb (kg) of ice.
Construction to be welded steel shell and frame. Exterior finish to be stainless steel front,
sides, back and bottom. Bin liner to have non-corroding polyethylene walls and stainless steel
bottom. Bin insulation to be CARB compliant non-HFC foam, bonded to shell and liner for added
structural strength. Bin top to be ABS plastic custom-cut for specific ice machine(s) to be used.
Lower door assembly to include non-corroding polyethylene ice door assembly, polyethylene
lift door with PowerHinge door hinge to eliminate gasket and latches, and inner SmartGATE ice
shield to positively control ice flow into ice door assembly area and reduce spillage. Entire lower
door assembly to be easily removable for installation through narrow doors. Upper inspection
windows to be of molded double-wall plastic to increase durability and minimize meltage and
condensation. Bin to have 6.00" (15.24cm) legs, adjustable to 7.25"(18.42 cm). Bin drain to be
1.00" FPT rigid PVC. NSF-listed.
Dimensional drawing
L1
C
L
C
L
D3
H1
H2
D1
D1
D2
W1
Model
Maximum
bin capacity
lb (kg) ¹
Cubic volume
cu ft (m)
Width - W1
in (cm)
Height
3, 4
- H1
in (cm)
Required
door access ³
in (cm)
Approximate
ship weight
lb (kg)
SG500S-30 
460 (209) 14.8 (0.41) 30.00 (76.2) 44.50 (113.0) 31.00 (78.7) 210 ( 95)
SG700S-30
680 (308) 21.7 (0.61) 30.00 (76.2) 60.00 (152.4) 31.00 (78.7) 212 ( 96)
SG1000S-36 
990 (449) 31.0 (0.88) 36.00 (91.4) 69.50 (176.5) 32.00 (81.3) 257 (117)
SG860S-48 
860 (390) 25.5 (0.72) 48.00 (121.9) 46.50 (118.1) 32.00 (81.3) 255 (116)
SG1010S-48
1000 (454) 31.9 (0.90) 48.00 (121.9) 56.00 (142.4) 32.00 (81.3) 268 (122)
SG1175S-48
1185 (538) 37.6 (1.06) 48.00 (121.9) 62.00 (157.5) 32.00 (81.3) 298 (135)
SG1300S-48
1320 (599) 41.9 (1.19) 48.00 (121.9) 65.00 (165.1) 32.00 (81.3) 270 (123)
SG1160S-56
1170 (531) 37.3 (1.06) 56.00 (142.2) 56.00 (142.2) 32.00 (81.3) 296 (134)
SG1350S-56
1360 (617) 43.2 (1.22) 56.00 (142.2) 62.00 (157.5) 32.00 (81.3) 322 (147)
SG1080S-60 
1080 (490) 34.3 (0.97) 60.00 (152.4) 46.50 (118.1) 32.00 (81.3) 355 (161)
SG1325S-60
1325 (601) 42.0 (1.19) 60.00 (152.4) 56.00 (142.2) 32.00 (81.3) 320 (146)
SG1475S-60
1490 (676) 47.4 (1.34) 60.00 (152.4) 62.00 (157.5) 32.00 (81.3) 321 (146)
SG1650S-60
1660 (753) 52.8 (1.50) 60.00 (152.4) 65.00 (165.1) 32.00 (81.3) 340 (154)
SG2000S-60 
2000 (908) 63.5 (1.80) 60.00 (152.4) 80.00 (203.2) 32.00 (81.3) 370 (168)
Notes:
Computed on cubic volume of bin. Does not reflect voids that can occur due to pyramiding.
Follett recommends installation of a floor drain with grate with all ice storage bins.
Required clearance for installation access through doors (may require removal of door assembly).
Special top required for ice machines weighing more than 1000 lb (454 kg). Add 0.5" (1.27 cm) to height. Contact factory.
SG500S-30, SG860S-48 and SG1080S-60 do not have upper inspection window.
SG1000S-36 standard with stainless steel top and 6.00" (15.24 cm) flanged legs. Correctional package not available.
18.00" (45.7 cm) sleeve with window on 62.00" (157.5 cm) high bin.
FLEXI-TOP, SMARTCART and POWERHINGE are trademarks of Follett LLC.
CHEWBLET, FOLLETT and SMARTGATE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country of origin.
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com