Spec Sheet
2
Form# 7015
Maestro Plus top mount foodservice
Dimensional drawingAccessories
SafeCLEAN Plus
™
ice machine cleaner, carton of 24 x 8 oz bottles
(item#01149962)
Nu-Calgon IMS-III sanitizer, 16 oz bottle (item# 00979674)
Water filters (refer to form #9905 )
Additional Maestro Plus accessories (refer to price list)
Specification for ice and beveragedispenser top
mount ice machines
W1 Width 22.70" (57.7 cm)
fits on 22.00" wide dispensers
D1 Depth 24.25" (61.6 cm)
H1 Height 21.25" (54.0 cm)
Service clearance 12.00" (30.5 cm) top -
nofrontobstructions
6.00" (15.24 cm) on exhaust side
(left, right and rear)
C1 Electrical
115 V/60/1
11 amps, 0.8 kW
15 amp circuit
7' (2 m) cord, NEMA 5-15 plug
C2 Water inlet 3/8" FPT,
installation of an in line water
filtration system is recommended
C3 Drain 3/4" MPT
water-cooled models require separate
condenser drains
Water-cooled ice machine
connections
C4 – 3/8" FPT condenser inlet
C5 – 3/8" FPT condenser drain
Refrigerant R404a
Air temperature 50 -100 F (10 - 38 C)
Water temperature 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kPa)
Condenser water pressure 10 - 125 psi (69 - 861 kPa)
Ice production at 70 F (21 C) air,
50 F (10 C) water
air-cooled models – 425 lb (193.0 kg)
water-cooled models – 443 lb (201.1 kg)
Ice production at 90 F (32 C) air,
70 F (21 C) water
air-cooled models – 325 lb (147.6 kg)
water-cooled models – 372 lb (169.0 kg)
Energy consumption
90 F (32 C) air; 70 F (21 C) water
air-cooled models – 5.4 kWh
water-cooled models – 5.0 kWh
per 100lb (45.4 kg) ice
Heat rejection air-cooled models – 5,000 BTU/hr
water-cooled models – 1,400 BTU/hr
to air, 3,600 BTU/hr to water
Water consumption 12.0 gal (45.4 L) of potable water
per 100lb (45.4 kg) of ice (per AHRI
test standards). 12.5 gal (47.3 L) at
standard flush setting.
Water flow requirement for
water-cooled condensers
0.25 gpm at 50 F (10 C)
0.5 gpm at 70 F (21 C)
1.25 gpm at 90 F (32 C)
Approximate ship weight 160 lb (73 kg)
NOTE: For indoor use only
SHORT FORM SPECIFICATION: Ice machine to be Follett model number
_________. Ice machine to be ______air- or ______water-cooled. Ice
machine production to be approximately 425 lb (193.0 kg) per day of
Chewblet ice at air temperature of 70 F (21 C), water temperature of 50 F
(10C). Ice machine to use environmentally responsible R404a refrigerant.
Ice machine to have stainless steel evaporator, auger and top bearings,
heavy-duty tapered roller bearing, and low-water safety circuit. NSF and
ETL listed.
H1
D1
W2
W1
H2
D2
Back view – air-cooled, top mount
5.03"
(12.8 cm)
15.22"
(38.65 cm)
2.34"
(5.94 cm)
2.324" (5.90 cm)
4.409" (11.20 cm)
2.123" (10.78 cm)
C3
C1
C2
W1
C1
8.03"
(20.4 cm)
5.03"
(12.8 cm)
2.34"
(5.94 cm)
15.22"
(38.65 cm)
2.324" (5.90 cm)
4.409" (11.20 cm)
2.123" (10.78 cm)
11.03"
(28.0 cm)
Back view – water-cooled, top mount
C3
C1
C1
C2
C4
C5
H1
W1
H1
Manufacturer/
Model number
W2 =
Width
in (cm)
D2 =
Depth
in (cm)
H2
1
=
Height
in (cm)
Harmony
top kit
Coca-Cola dispensers
Freestyle 7000
2, 3
30.10 (76.5) 33.11 (84.1) 47.00 (119.4) MTF30SCP
Freestyle 9000
2
25.50 (64.8) 35.50 (90.2) 73.75 (187.3) MTF24SCP
Freestyle 9100
2
25.50 (64.8) 39.25 (99.7) 77.25 (196.2) MTF26SCP
Cornelius dispensers
DB/DF/ED150 series 22.00 (55.9) 30.0 (76.2) 34.38 ( 87.3) MTC22SCP
DB/DF/ED175 series 24.50 (62.2) 30.0 (76.2) 34.38 ( 87.3) MTC24SCP
DB/DF/ED200 series 30.00 (76.2) 30.0 (76.2) 34.38 ( 87.3) MTC30SCP
DB/DF/ED250 series 30.00 (76.2) 30.0 (76.2) 38.38 ( 97.5) MTC30SCP
Lancer dispensers
4500-22N, FS-22N 22.00 (55.9) 30.50 (77.5) 36.50 ( 92.7) MTL22SCP
4500-30N 30.00 (76.2) 30.50 (77.5) 36.50 ( 92.7) MTL30SCP
FS-30N 30.00 (76.2) 30.50 (77.5) 42.13 (107.0) MTL30SCP
Lancer Sensation 30.00 (76.2) 31.00 (78.7) 38.25 ( 97.2) MTL30SCP
Lancer Touchpoint 32.50 (82.6) 33.70 (85.6) 40.00 (101.6) MTL30SCP
Pepsi dispensers
Spire 3.0 27.00 (68.6) 35.00 (88.9) 38.12 ( 96.8) MTP24SCP
Spire 5.0 / 4.1 30.50 (77.5) 36.00 (91.4) 42.75 (108.6) MTP30SCP
1
Net height after installation of top kit.
2
Consult with Coca-Cola and Follett to qualify application prior to ordering.
3
Top adapter 46412 and ice kit 46430 must also be ordered from Coca-Cola.