Spec Sheet

2
Form# 3265
Ice Manager diverter valve system
Configuring the Ice Manager diverter valve system
1. Select Horizon Elite ice machine model
Using the model configuration table below, determine the Horizon Elite ice machine that will best suit your needs. For more specifications on
Horizon Elite ice machine models, see form# 7030, 7035, 8180 and 3311. Existing Horizon series ice machines may be retrofitted to integrate
with the Ice Manager diverter valve system. Based on model# and serial#, determine the retrofit kit to order using the table below.
Horizon Elite ice machine model: _______________________ serial# (if existing Horizon ice machine): _______________________
Horizon Elite 1010, 1410, 1810 and 2110 Series Ice Machine Model Number Configurations
for use with Ice Manager Diverter Valve System
A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for
connection to parallel rack system
A M SC 1010HC
HC Horizon
Chewblet
1010
1410
1810
2110
Icemaker Voltage Series Condenser
M Ice Manager S RIDE
(remote ice
delivery
equipment)
Application Configuration
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote.
If remote unit, high side is
208-230/60/1.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
2. Select two dispensers or bins to be filled
Choose two approved units for ice storage. If exact model is not
known, note type of unit. Lane 1 is the primary lane and should
be assigned to bin or dispenser with highest demand.
Lane 1: ___________________________________
Lane 2: ___________________________________
If desired unit is not listed below, contact factory.
Follett Ice Transport and Storage
New Follett ice storage bin or transport system model.
See form# 8590 for models. When ordering bin, specify bin top to be cut for
IceManager diverter valve system. If ice machine will be top mounted on bin,
see Step 3.
Existing Follett ice storage bin or transport system model.
Requires replacement top cut for Ice Manager diverter valve system.
Seeform# 4025 for item numbers. If ice machine will be top mounted on bin,
seeStep3.
Follett Symphony Plus Ice and Water Dispenser 110CM
Follett Vision Ice and Beverage Dispensers
New Follett Vision 155 and 300 ice and beverage dispenser model. VU155N
models are available via Special Quote Request (SQR).
See form# 4025 for models. Order Vision with VUIMDVKIT to be configured for
Ice Manager diverter valve system.
Existing Vision 155 serial# must be greater than B50001.
Existing Vision 300 serial# must be greater than B50005.
Ice and Beverage Dispensers
1
Coca-Cola Freestyle 9000
2
Lancer 4500-22N Servend MD150
Coca-Cola Freestyle 7000
2, 3
Lancer 4500-30N Servend MD175
Coca-Cola Freestyle 9100
2, 4
Lancer FS-16N Servend MD200
Cornelius ED/DF150 Series Lancer FS-22N Servend MD250
Cornelius ED/DF175 Series Lancer FS-30N Servend MDH302
Cornelius ED/DF200 Series Lancer FS-44N Servend MDH302
Cornelius ED/DF250 Series Lancer Sensation 30"/44" Servend MDH402
Cornelius ED/DF300 Series Lancer Touchpoint Servend SV175
Cornelius IDC215 Lancer Bevariety Servend SV200
Cornelius IDC255/Pro/Fast Gate Pepsi Spire 3.0/5.0/4.1
5
Servend SV250
Cornelius Flavor Fusion/Overload Servend FRP-250
1
Consult with dispenser provider to be sure the dispenser is ready to dispense nugget ice.
2
Consult with Coca-Cola and Follett to qualify application prior to ordering.
 Requires DVF30 top kit ordered separately from Follett and top adapterkit 46412 and ice kit
46430, which must be ordered from Coca-Cola.
 Requires DVF26 top kit ordered separately from Follett.
 Approved only for Pepsi Spire 3.0, 5.0 and 4.1 designed for top mount ice machines. Requires
DVP22 top kit for 3.0 and DVP30 top kit for 5.0 and 4.1, ordered separately from Follett. For
manual fill versions of Pepsi Spire 3.0, 5.0 and 4.1, contact factory.
3. Choose Horizon Elite series ice machine
mounting option
Mounting option: __________________________________
Wall Mount Bracket Item #
HCD1010/1410 and HCF1010/1410/2110 00997098
HCC1010 and HCC1410 01085455
Machine Stand Item #
HCC1010 and HCC1410 01085463
HCD1010/1410/1810/2110 and HCF1010/1410/1810/2110 00997080
Follett Bin - Top Mount
1
New bin, see form# 8590 for models.
When ordering bin, specify bin top to be cut for Ice Manager diverter valve
system and ice machine
1
.
Existing bin, see form# 4025 for bin top listing.
Requires replacement top cut for Ice Manager diverter valve system and
icemachine when ordering
1
.
Other
Specify what the Horizon series ice machine will be mounted on.
1
See drawings on page 3 for min. bin width and required clearances.
¹ Extra transport tubing may be required to
connect ice machine to diverter valve
Horizon Series Retrofit Kits ¹
Horizon Model # Item #
1000/1400/1650
after C43650
00191965
1000/1400A/W
prior to C43650
00185181
1000/1400R/N
prior to C43650
00185272
1010/1410/2110/1810 01116177