Installation Instructions

6
remote condensing BIN • TOP-MOUNT
Prepare the bin.
3
Bin preparation
• Remove protective tape from
gaskets
Bin top preparation
3.1
➋
➊
➊
➌
• Apply gaskets
➊
• Install shuttle actuator
➋
through bin top
and secure with locking nut
➌
Bin top preparation
3.2
Prior to installing the louvered docking
assembly, ensure that the drain tting is
oriented (right or left) correctly for your
installation. An optional straight drain tting
is also supplied. You may need to remove
the back panel of the docking assembly in
order to re-orient or change the drain tting.
Replace back panel prior to mounting the
docking assembly.
BEFORE PROCEEDING