Spec Sheet

2
Form# 8180
Remote 1810, 2110 series ice machine
Specification, evaporator unit
Horizon Elite 1810 series Horizon Elite 2110 series
W1 Width 22.70" (57.7 cm)
Fits on 22.00" wide dispensers
22.70" (57.7 cm)
Fits on 22.00" wide dispensers
D1 Depth 23.70" (60.2 cm) 23.70" (60.2 cm)
H1 Height 22.50" (57.2 cm) 22.50" (57.2 cm)
Clearance top, left and right–1.00"(2.54 cm) top, left and right–1.00"(2.54 cm)
C1 Electrical
115 V/60/1
5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5‑15 plug
5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5‑15 plug
Operating power 368 W 368 W
C2 Ice transport tube see page 7 for details see page 7 for details
C3 Water inlet 3/8" OD push‑in water inlet –
internalconnection
3/8" OD push‑in water inlet –
internalconnection
C4 Drain 3/4" MPT, 1" drain required
see page 7 for details
3/4" MPT, 1" drain required
see page 7 for details
C5 Ice bin signal cord for Vision applications only for Vision applications only
C6 Liquid line 3/8" 3/8"
C7 Suction line 7/8" 7/8"
Air temperature 50 ‑100 F (10 ‑ 38 C) 50 ‑100 F (10 ‑ 38 C)
Water temperature 45 ‑ 90 F (7 ‑ 32 C) 45 ‑ 90 F (7 ‑ 32 C)
Potable water pressure 10 ‑ 70 psi (69 ‑ 483 kPa) 10 ‑ 70 psi (69 ‑ 483 kPa)
Ice production see ice production chart on page 8 see ice production chart on page 8
Energy consumption
90 F (32 C) air,
70 F (21C) water
single phase – 4.59 kWh
three phase – 3.33 kWh
per 100lb(45.4 kg) ice
single phase – 4.65 kWh
three phase – 2.93 kWh
per 100lb(45.4 kg) ice
Water consumption 12.4 gal (47 L) of potable water per 100lb
(45.4kg) ofice (per AHRI test standards).
13.9gal (53 L) at lowTDS flush setting.
12.4 gal (47 L) of potable water per 100lb
(45.4kg) ofice (per AHRI test standards).
13.9gal (53 L) at lowTDS flush setting.
Refrigerant R404a R404a
BTU/hr (Kcal/hr) at 0 F (‑18 C)
evaporator, 90 F (32C) ambient air
15,700 (3,956) 18,200 (4,586)
Rack systems EPR valve set point
EPR valve to be supplied by installer
0 F (‑18 C) 0 F (‑18 C)
Approximate ship weight 170 lb (77 kg) 175 lb (79 kg)
Approximate net weight 160 lb (73 kg) 165 lb (75 kg)
NOTE: For indoor use only. Outdoor installation of evaporator unit is not recommended and will void warranty.
Dimensional drawing
Accessories
Top kit for ice and beverage dispensers (page 5)
Water filters (refer to form# 9905)
Wall mount bracket (item# 00997098)
Ice machine stand, height‑adjustable (item# 00997080)
Timer to control one or two ice machines
(item# 00967625)
Longer ice transport tube, specify length: ___ ft/m in
5'/1.5 m increments (10'/3 m provided as standard for
RIDE models) (item#00174896)
Insulated 35' (10.7 m) refrigeration lines
(item#00977785) – (not pre‑charged) for 1810R
and2110R
SafeCLEAN Plus
™
ice machine cleaner
1 x 8 oz (237 ml) bottle(item#01147826)
6 x 8 oz (237 ml) bottles(item#01149954)
Carton of 24 x 8 oz (237 ml) bottles
(item#01149962)
SaniSponge
™
, 24 sanitary sponges (item# 01075431)
W1
D1
H1
C1
C1
C2
C7
C6
C3
C4
C5
Back View
22.00"
(55.9 cm)
22.69"
(57.6 cm)
2.73"
(6.93 cm)
2.28"
(5.79 cm)
6.04"
(15.34 cm)
19.59"
(49.76 cm)
16.00"
(40.64 cm)
L2
L1
G