Spec Sheet

ManualsBrandsFollett ManualsCommercial Equipment23" Horizon Elite Series Remote Condenser Ice Machine with 1784 lbs. Daily Ice Production, RIDE Technology, Chewblet Ice, and Agion Silver-Based Antimicrobial in Stainless Steel

Horizon Elite

™

remote 1810, 2110 series Chewblet® ice machine

Short form speciﬁcation:

Ice machine to be a Follett

Horizon Elite ice machine model

______________ [Insert size/series,condenser type and installation/

mounting, from model number guide] capable of producing compressed

nugget ice using an ecient, sanitary horizontal evaporator/auger system

and delivering ice by a ﬂexible wire reinforced transport tube to

ice storage bin, iceand water dispenser, ice and beverage dispenser,

drop-in dispenser or Ice Manager

™

diverter valve system, slide-out

evaporator with utility docking station, front-mounted unit status display,

evaporator water inlet at harvest end with automatic ﬂush while producing

ice, and semi-automatic cleaning and sanitizing system, plusall the

featureslisted below and mounting/performance-enhancing accessories

checked.

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Job

Item

Independent third party studies. Contact Follett for details.

Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

Features

Horizon Elite

1810 series - up to 1784 lb (810 kg) in 24 hours

2110 series - up to 2039 lb (925 kg) in 24 hours

- automatically transport ice through a tube with RIDE

technology from up to 75' (22.8 m) away

- chewable, compressed nugget ice is preferred over cubes

- Chewblet ice dispenses reliably from ice and

beveragedispensers

- available with approximately 1.00" (2.54 cm) long

standard Chewblet ice or optional 3/8" (0.95 cm) long

Micro Chewblet

™

ice

- quiet production without noisy harvest cycles

Revolutionary, scale inhibiting design

- produces ice that has 15% the TDS of the incoming water

for optimum dispensing and long life in drinks

- quarantines and regularly expels scale producing dissolved

solids to dramatically reduce scalebuildup

- increases time between descaling and reduces or

eliminates the need for expensive scale treatment

- saves 35% water compared to comparable cubers

- meets 2018 Department of Energy regulations

- three phase models ENERGY STAR

certiﬁed

Durable, attractive ice machine

- regular bearing inspection or replacement is notrequired

- upgraded, easy-to-read LED operating status and

diagnosticdisplay

Designed with sanitation in mind

- Agion

silver-based antimicrobial product protection of key

ice and water contact components

- ﬂoatless, sealed design inhibits formation of bioﬁlms

- semi-automatic cleaning and sanitizing system

Warranty

- 3 years parts and labor, 5 years compressor parts

Certiﬁcations

Model configurations

For use with

Install/

mount Condenser Evaporator

Item number

1810 series

Item number

2110 series

ice storage bin

top

mount

with 115/60/1

4, 5

HCD1810RBT HCD2110RBT

without 115/60/1 HCD1810NBT HCD2110NBT

RIDE

with 115/60/1

4, 5

HCD1810RBS HCD2110RBS

without 115/60/1 HCD1810NBS HCD2110NBS

Follett Vision

™

undercounter

ice and beverage

dispenser

RIDE

with 115/60/1

4, 5

HCD1810RVS HCD2110RVS

without 115/60/1 HCD1810NVS HCD2110NVS

Cornelius

PR150

undercounter ice

and beverage

dispenser ²

RIDE

with 115/60/1

4, 5

HCD1810RPS HCD2110RPS

without 115/60/1 HCD1810NPS HCD2110NPS

countertop ice

and beverage

dispenser

(by others)

top

mount

with 115/60/1

4, 5

HCD1810RHT HCD2110RHT

without 115/60/1 HCD1810NHT HCD2110NHT

RIDE

with 115/60/1

4, 5

HCD1810RHS HCD2110RHS

without 115/60/1 HCD1810NHS HCD2110NHS

drop-in dispenser

(by others)

RIDE

with 115/60/1

4, 5

HCD1810RJS HCD2110RJS

without 115/60/1 HCD1810NJS HCD2110NJS

Ice Manager

diverter

valve system

RIDE

with 115/60/1

4, 5

HCD1810RMS HCD2110RMS

without 115/60/1 HCD1810NMS HCD2110NMS

¹ Ordered separately

² Not compatible with Micro Chewblet ice

³ Requires top kit (see page 5 for part number)

⁴ Condensing unit is 208-230/60/1

⁵ For three phase remote condensing unit, replace third character (D) with an F

e.g. HCF1810RBT

⁶ For Micro Chewblet ice, replace second character (C) with an M

e.g. HMD2110RBT

Summary of content (8 pages)

PAGE 1
Horizon Elite™ remote 1810, 2110 series Chewblet® ice machine Short form specification: Features Horizon Elite 1810 series - up to 1784 lb (810 kg) in 24 hours 2110 series - up to 2039 lb (925 kg) in 24 hours - automatically transport ice through a tube with RIDE® technology from up to 75' (22.8 m) away - chewable, compressed nugget ice is preferred over cubes1 - Chewblet ice dispenses reliably from ice and beverage dispensers - available with approximately 1.00" (2.
PAGE 2
Accessories Dimensional drawing Top kit for ice and beverage dispensers (page 5) Water filters (refer to form# 9905) Wall mount bracket (item# 00997098) Ice machine stand, height-adjustable (item# 00997080) Timer to control one or two ice machines (item# 00967625) Longer ice transport tube, specify length: ___ ft/m in 5'/1.5 m increments (10'/3 m provided as standard for RIDE models) (item# 00174896) Insulated 35' (10.
PAGE 3
Dimensional drawing W1 H1 D1 Specification, condenser unit W1 Width D1 Depth (hail guard included) H1 Height Electrical Operating power Minimum circuit ampacity Maximum circuit HVACR breaker size Horizon Elite 1810 series Horizon Elite 2110 series 30.00" (76.2 cm) – all models 38.50" (97.8 cm) – all models 25.75" (66.3 cm) – all models single phase – 208-230/60/1 three phase – 208-230/60/3 single phase – 6.0 kW three phase – 3.6 kW single phase – 26.2 A three phase – 15.
PAGE 4
1 – Locating the ice machine Horizon Elite remote Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to 75' (22.8 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to service access, unit ventilation and ice tube runs (see pages 5-7).
PAGE 5
1 – Locating the ice machine (continued) Top mounting – compatible ice and beverage dispensers 1 Manufacturer Coca-Cola dispensers Cornelius dispensers Lancer dispensers Pepsi dispensers Servend dispensers Model Number Width in (cm) Depth 2 in (cm) Height 3 in (cm) Top kit Freestyle 7000 30.10 (76.5) 33.11 (79.0) 47.00 (119.4) H22F30-F 4, 5 Freestyle 9000 25.50 (64.8) 35.50 (90.2) 73.75 (187.3) H22F24-F 4, 6 Freestyle 9100 25.50 (64.8) 39.25 (99.7) 77.2 (196.
PAGE 6
2 – Undercounter/in-cabinet mounting Cabinet details Important specifier notes 1. Cabinet door opening must meet minimum size requirements shown and be free of obstructions to allow ice machine to slide out (no lip or utilities to block removal). minimum 1/4" per foot (2 cm per meter) Ice transport tube pitch toward ice machine secure to prevent dips and traps from forming 2. Cabinet base must be capable of supporting ice machine and allow ice machine to rest flat on cabinet bottom. 3.
PAGE 7
4 – Horizon Elite drain - specifier guidelines Important specifier notes: Where code allows, follow recommendation below. Flush drain plumbing – For regular machine drainage 1. Connect the silicone tubing to the ice machine 3/4" drain barb ➊. ➊ 2. Assemble the 3/4" barb x 3/4" FPT to the 3/4" MPT x 1" slip. Connect the other end of the silicone tubing to the 3/4" barb ➋. Minimum 8" radius 2 ft x 1" OD silicone tubing 3. Connect the 1" slip fitting to the 1" stand pipe/drain ➌.
PAGE 8
Remote condensing unit Condensing unit installation specifications Important specifier notes 1. Provide front, back, top and side clearances as shown. 36.00" (91.4 cm) height clearance 2. The maximum refrigerant line run length is 75' (22.9 m). Installations require 14.5 lb of refrigerant. air in 3. The maximum line rise above the evaporator is 35' (10.7 m). Condensing unit above evaporator unit – 35' (10.7 m) (installations with rise over 20' (6.