Installation Instructions for RIDE Models

6
remote HARMONY and Symphony Plus • RIDE Technology
5"
(127 mm)
3.0" ∅
(77,2 mm)
Standard (Cornelius, Lancer, or Servend)
Locate hole position 5" (127 mm) from back
of dispenser top
Back of Top
Front of Top
5"
(127 mm)
3.0" ∅
(77,2 mm)
5" (127 mm)
110CM Symphony Plus
Locate hole position 5" (127 mm) from
back and right of dispenser top
10.00"
9.00"
3.0" ∅
Locate hole position 10" (254 mm) from
back and 9" (229 mm) from right of
dispenser top
Back of Top
Front of Top
Lancer Sensation and Touchpoint
110CM Symphony Plus w/IMDV
R1.750
5" (127 mm)
5" (127 mm)
4" (102 mm)
Lancer Sensation and Touchpoint w/IMDV
10.00"
9.00"
4"
Prepare the dispenser.
3
Dispenser preparation
Attention! The location of the hole in the dispenser top is dependent
on the type of dispenser. Be sure to follow Step 3.1 for the
appropriate dispenser.
Hole location - Harmony (Lancer, Cornelius or Servend), or 110CM Symphony Plus
3.1