Installation Instructions for RIDE Models

14
remote HARMONY and Symphony Plus • RIDE Technology
Transport tube
Install the transport tube.
5
➋
1/4"
1'
➌
➑
➒
➓
➊
Hot Water
160 F (71 C)
➍
➏
➐
➎
Ice transport tube tips
• Insulate entire length of ice transport tube
➊
• Secure ice transport tube
➋
as needed to prevent dips and traps from forming.
For long tube runs see guide on page 19.
• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m)
➌
• Ice transport tube must drain towards ice machine
Ice transport tube to dispenser
• Be sure tube ends are square
➍
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
➎
before making connection to ease assembly
• Push ice transport tube onto shuttle actuator nipple
➏
• Install hose clamp
➐
Ice transport tube to Ice machine
• Be sure tube ends are square
➑
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
➎
before making connection to ease assembly
• Push transport tube onto ice machine nipple
➒
• Install hose clamp
➓
Transport tube installation.
5.1