Installation Instructions for RIDE Models

13
HARMONY and Symphony Plus • RIDE Technology remote
DOCKING STATION
• Prior to installing the louvered docking assembly, ensure that the drain tting is oriented (right
or left) correctly for your installation. An optional straight drain tting is also supplied. You may
need to remove the back panel of the docking assembly in order to re-orient or change the
drain tting. Replace back panel prior to mounting the docking assembly.
• Position and screw louvered docking assembly to the bottom of counter inside of access panel/
door min. of 3.25” (83 mm) from the front edge of the cross brace
➊
• The mounting surface for the louvered docking assembly must be solid.
Do not mount directly onto runners or channels.
• There must be no lip or edge that would hinder the ice machine from sliding in or out of the
louvered docking station
➋
• Ice machine must be installed facing forward as shown for service accessibility
➌
Undercounter installation requirements
4.2
No Lip
➋
➌
24" min.
(61 mm
23.5" min.
(59.7 mm)
Access panel/
door on counter
3.25" (83 mm) min.
➊
CROSSBRACE
Top View