Installation Instructions for RIDE Models

12
remote HARMONY and Symphony Plus • RIDE Technology
Install the louvered docking assembly.
Louvered docking assembly
4
• Mount louvered docking assembly
➊
• “Rough-in” the refrigerant piping
➋
2.1
Louvered docking assembly
4.1
➊
➊
3/8˝ ∅
high pressure
line
7/8" ∅ low pressure line
2" (50,8 mm)
Stub Typ
1.81" (46 mm)
3.75" (95.3 mm)
2" (50,8 mm)
➋
Machine stand accessory
Wall bracket accessory
• Mount louvered docking assembly to wall
bracket accessory
• Mount louvered docking assembly to
machine stand accessory
Prior to installing the louvered docking assembly, ensure that the
drain tting is oriented (right or left) correctly for your installation.
An optional straight drain tting is also supplied. You may need to
remove the back panel of the docking assembly in order to re-orient
or change the drain tting. Replace back panel prior to mounting the
docking assembly.
BEFORE PROCEEDING