Spec Sheet

6
Form# 7035
Remote 1010, 1410 series ice machine
3 – Horizon Elite ice machine mounting accessories
Optional wall mount bracket Optional machine stand Important specifier notes
22.00"
(55.9 cm)
25.50"
(64.8 cm)
23.00"
(58.4 cm)
A
C
D
B
6.88"
(17.5 cm)
A - 15.875" (40.3 cm)
B - 19.375" (49.2 cm)
C - 13.00" (33.0 cm)
D - 21.00" (53.3 cm)
1. For secure wall mounting, specify optional
wall mount bracket.
2. Wall and fasteners must support the weight
of the ice machine, bracket, supply water and
ice. Use of a backing board may be required
with hollow wall construction.
3. Machine stand mounting adds 6.88"
(17.5cm) to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward ice
machine and should be secured to prevent
dips and traps from forming.
2 – Undercounter/in-cabinet mounting
Cabinet details
Important specifier notes
Cabinet base
must be flat and free of obstructions
(no lip or utilities to block removal)
Cabinet door opening
24.00"W x 23.5"H
(60.9 cm x 59.7 cm) minimum
slides
out
Ice transport tube
secure to prevent dips
and traps from forming
12.00" (30.5 cm) minimum
between ice machine
and dispenser
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice machine
1. Cabinet door opening must meet
minimum size requirements shown
and be free of obstructions to allow
ice machine to slide out (no lip or
utilities to block removal).
2. Cabinet base must be capable
of supporting ice machine and
allow ice machine to rest flat on
cabinetbottom.
3. No counter supports, electric or
plumbing can run in front of the
icemachine.