Spec Sheet

2
Form# 7035
Remote 1010, 1410 series ice machine
Specification, evaporator unit
Horizon Elite 1010 series Horizon Elite 1410 series
W1 Width 22.70" (57.7 cm)
Fits on 22.00" wide dispensers
22.70" (57.7 cm)
Fits on 22.00" wide dispensers
D1 Depth 22.50" (57.1 cm) 24.50" (62.2 cm)
H1 Height 21.25" (53.9 cm) 21.25" (53.9 cm)
Clearance top, left and right–1.00"(2.54 cm) top, left and right–1.00"(2.54 cm)
C1 Electrical
115 V/60/1
5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5-15 plug
5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5-15 plug
Operating power 0.6 kW 0.6 kW
C2 Ice transport tube see page 7 for details see page 7 for details
C3 Water inlet 3/8" OD push-in water inlet –
internalconnection
3/8" OD push-in water inlet –
internalconnection
C4 Drain 3/4" MPT, 1" drain required
see page 7 for details
3/4" MPT, 1" drain required
see page 7 for details
C5 Ice bin signal cord for Vision applications only for Vision applications only
C6 Liquid line 3/8" 3/8"
C7 Suction line 5/8" 5/8"
Air temperature 50 -100 F (10 - 38 C) 50 -100 F (10 - 38 C)
Water temperature 45 - 90 F (7 - 32 C) 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kPa) 10 - 70 psi (69 - 483 kPa)
Ice production see ice production chart on page 8 see ice production chart on page 8
Energy consumption
90 F (32 C) air,
70 F (21C) water
single phase – 4.68 kWh
three phase – 3.57 kWh
per 100lb(45.4 kg) ice
single phase – 4.63 kWh
three phase – 3.34 kWh
per 100lb(45.4 kg) ice
Water consumption 12.0 gal (47 L) of potable water per 100lb
(45.4kg) ofice (per AHRI test standards).
12.4 gal (46.9 L) at lowTDS flush setting
12.5 gal (47 L) of potable water per 100lb
(45.4kg) of ice (per AHRI test standards).
12.3 gal (46.5 L) at lowTDS flush setting
Refrigerant R404a R404a
BTU/hr (Kcal/hr) at 0 F (-18 C) evaporator,
90F (32C) ambient air
7,700 (1,940) 10,000 (2,520)
Rack systems EPR valve - set to
EPR valve to be supplied by installer
0 F (-18 C) 0 F (-18 C)
Approximate ship weight 195 lb (88 kg) 205 lb (93 kg)
Approximate net weight 185 lb (84 kg) 195 lb (88 kg)
NOTE: For indoor use only. Outdoor installation of low side is not recommended and will void warranty.
Dimensional drawing
Accessories
Top kit for ice and beverage dispensers (page 5)
Water filters (refer to form# 9905)
Wall mount bracket (item# 00997098 )
Ice machine stand, height-adjustable (item# 00997080)
Timer to control one or two ice machines
(item# 00967625)
Longer ice transport tube, specify length: ___ ft/m in
5'/1.5m increments (10'/3 m provided as standard for
RIDE models) (item#00174896)
Insulated refrigeration lines (not pre-charged) for 1010R
and1410R
35' (11 m) (item#00193227)
50' (50 m) (Item# 01262328)
SafeCLEAN Plus
™
ice machine cleaner
1 x 8 oz (237 ml) bottle(item#01147826)
6 x 8 oz (237 ml) bottles(item#01149954)
Carton of 24 x 8 oz (237 ml) bottles
(item#01149962)
SaniSponge
™
, 24 sanitary sponges (item# 01075431)
W1
D1
H1
C1
C1
C2
C7
C6
C3
C4
C5
Back View
22.00"
(55.9 cm)
22.69"
(57.6 cm)
2.73"
(6.93 cm)
2.28"
(5.79 cm)
6.04"
(15.34 cm)
19.59"
(49.76 cm)
16.00"
(40.64 cm)
L2
L1
G