Spec Sheet

4
Form# 7030
Self-contained 1010, 1410 series ice machine
1 – Locating the ice machine (continued)
Top mounting – compatible ice and beverage dispensers
1
Manufacturer Model number
Width
in (cm)
Depth
2
in (cm)
Height
3
in (cm) Top kit
Coca-Cola
dispensers
Freestyle 7000 30.10 (76.5) 33.11 (84.1) 47.00 (119.38) H30F30-F
4, 5
Cornelius
dispensers
DB/ED/DF 200 series 30.00 (76.2) 30.00 (76.2) 34.38 (87.3) H30C30-F
DB/ED/DF 250 series 30.00 (76.2) 30.00 (76.2) 38.38 (97.5) H30C30-F
DB/ED/DF 300 series 44.00 (111.8) 30.00 (76.2) 34.00 (86.4) H30C44-(F or B)
6
FlavorFusion / Overload 30.00 (76.2) 30.70 (78.0) 39.38 (100.0) H30C30-F-FF
IDC215 30.00 (76.2) 30.70 (78.0) 39.38 (100.0) H30C30-F-IDC
IDC255 and Pro Fast Gate 30.00 (76.2) 30.70 (78.0) 36.38 (92.4) H30C30-F-IDC
7
Lancer
dispensers
4500-30N 30.00 (76.2) 30.50 (77.5) 36.50 (92.7) H30L30-F
FS-30N 30.00 (76.2) 30.50 (77.5) 42.13 (107.0) H30L30-F
Bevariety 30.00 (76.2) 31.00 (78.7) 37.75 (95.9) H22L30-F-STP
Sensation 30" 30.00 (76.2) 31.00 (78.7) 38.25 (97.2) H30L30-F-STP
Sensation 44" 44.00 (111.8) 31.00 (78.7) 39.38 (100.0) H22L44-F-STP
Touchpoint 32.50 (82.6) 33.70 (85.6) 40.00 (101.6) H30L30-F-STP
Pepsi
dispensers
Spire 5.0 / 4.1 30.50 (77.5) 36.00 (91.4) 42.75 (108.6) H30P30-F
Servend
dispensers
MDH-302 42.80 (108.7) 31.00 (78.7) 32.38 (82.2) H30S44-(F or B)
6
1
All approved dispensers can be filled with a RIDE model Horizon Elite ice machine without a top kit except for Coca-Cola Freestyle 7000 and Pepsi Spire 3.0, 5.0 and 4.1, see page 3 for details.
2
Requires minimum 1.00" (2.54 cm) clearance between back of dispenser and wall.
3
Net height after installation of top kit (excluding height of ice machine).
4
Consult with Coca-Cola and Follett to qualify application prior to ordering.
5
Top adapter 46412 and ice kit 46430 must also be ordered from Coca-Cola.
6
Specify “F” for front facing, or ”B“ for backward facing units.
7
Contact factory regarding IDC Pro.
2 – Undercounter/in-cabinet mounting
Cabinet details
Important specifier notes
Cabinet door opening
1010/1410 series models require 1.00" (2.54 cm) all around,
31.00"W x 23.5"H (78.7 cm x 59.69 cm) minimum
Cabinet base
must be flat and free of obstructions
(no lip or utilities to block removal)
slides
out
1. Cabinet door opening must meet
minimum size requirements shown
and be free of obstructions to allow
ice machine to slide out (no lip or
utilities to block removal).
2. Cabinet base must be capable
of supporting ice machine and
allow ice machine to rest flat on
cabinetbottom.
3. No counter supports, electric or
plumbing can run in front of the
icemachine.