Installation Instructions

12
self-contained ICE MANAGER
 • Positionplateintoopeningandsecure
withsuppliedscrew
Power cord
6.11
 • Removetwisttie
 • Carefullypasscordthruopeningand
plugintowalloutlet
 • ForH_Eunits,installasuitableplug
Power cord
6.10
NOTICE
Ice machine MUST be sanitized prior to operation!
Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
➊
➋
 • Connectcoolingwaterlinestoice
machine
➊
 • Watervalveissetatthefactory.DO NOT
removesealoradjustwatervalve
➋
Cooling lines and power
6.9
CLEANER FULL DRAIN CLOG HIGH PRES HIGH AMPS
SERVICE MAINT/CLEAN LOW WATER TIME DELAY SLEEP CYCLE MAKING ICE LOW BIN POWER ON
CLEAN
TDS
HIGH
LOW
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW: for low-scale water
TDS switch
6.12