Ride Model Installation Instructions

10
Horizon Elite 710/1010/1410 HARMONY • RIDE Technology
5. External Connections
5.1 Transport tube installation
1/4"
1'
➌
➋
➑
➒
➓
➊
➍
➏
➐
➎
Hot Water
160 F (71 C)
Ice transport tube tips
§ Insulate entire length of ice transport tube ➊
§ Secure ice transport tube ➋ as needed to prevent dips and traps from forming. For long tube runs see next
page.
§ Pitch ice transport tube at least 1/4" per foot (6,4mm/0.3m) ➌
§ Ice transport tube must drain towards ice machine
Ice transport tube to dispenser
§ Be sure tube ends are square ➍
§ Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎ before making
connection to ease assembly
§ Push ice transport tube onto ice machine nipple ➏
§ Install hose clamp ➐
Ice transport tube to Ice machine
§ Be sure tube ends are square ➑
§ Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎ before making
connection to ease assembly
§ Push ice transport tube onto ice machine nipple ➒
§ Install hose clamp ➓