Installation Instructions

self-contained Cornelius • RIDE Technology

Ground

❹

➋

➊

16"

(61 cm)

➌

➎

➏

➐

• Mount the electrical box to the side of the dispenser

➊

to establish a ground connection.

Note: If a 4 x 4 box is mounted to a non-grounded surface, connect ground wire at an

appropriate ground.

• Connect the bin signal cord to the plug on the electrical box.

➋

• Insert 16" (61 cm) of the long bin signal cable

➌

into the hole in the back of the louvered

docking station

➍

and secure in place with strain relief provided.

• After sliding the ice machine module into the louvered docking station, disconnect one wire from

shuttle switch and replace with wire from adapter plug.

➎

• Connect wire removed from shuttle switch to male connector on adapter plug wire.

➏

• Complete normal installation procedure for the ice machine using the installation manual that

shipped with the ice machine.

• Connect adapter plug into bin signal plug.

➐

2.1

Bin Signal Installation

6.1

Bin signal

Install the bin signal.