Installation Instructions

HARMONY • RIDE Technology Horizon Elite 710/1010/1410
9
air
in
exhaust
must mate directly
to air intake gasket
12.00" (30.4 cm) minimum
between ice machine
and dispenser
see dispenser
specification
sheet for
installation
requirements
18.00"
(45.7 cm) min.
electric
water
ice transport tube
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice
machine
secure to prevent dips
and traps from forming
supplied
grilles
Horizon
ice machine
cabinet door
drain
23.55"
(59.9 cm)
min.
24.50"
(62.2 cm)
min.
door & gasket
must mate
directly
cabinet door
2.00"
(5.08 cm)
2.25"
(5.7 cm)
cutout
side of
ice machine
bottom of
ice machine
24.00" W x 15.00" H (60.96 cm x 38.1 cm)
supplied air
intake grille
cutout for supplied air intake grille
23.55"
(59.9 cm)
minimum
25.25" (64.1 cm) min.
locating
cutout
Front
completed installation with
gasket and door in place –
side view
Horizon ice machine
§ The supplied exhaust grille must be located at
least 18"(46cm) from the supplied air intake grille
(exhaust air must notrecirculate with intake air).
§ Cabinet interior must be open to allow for
unrestricted exhaust air ow.
§ Ice transport tube needs minimum 1/4" per foot (2
cm per meter) pitch toward ice machine and should
be secured to prevent dips and traps from forming.
§ Cabinet door must mate directly to air intake
gasket.
§ Cabinet interior must provide a minimum clear
space of 24.5" deep (62.2 cm) by 23.5" high
(59.9cm).
§ Cutout for supplied grilles must meet minimum
size requirements shown above.
§ Utilities should be conveniently located as shown.