Installation Instructions

HARMONY • RIDE Technology Horizon Elite 710/1010/1410
21
8.6 Dispenser diverter plate installation – CORNELIUS, ED, DF AND DB SERIES
ICE CHUTE
GATE MOUNTING PLATE
GASKET
STORAGE HOPPER
ICE DIVERTER
10-32 WASHER
10-32 NUT
FLANGE EXTENDS INTO
STORAGE HOPPER
THROUGH GATE
OPENING
APPLY RTV TO THIS
SURFACE TO SEAL
TO HOPPER GATE
MOUNTING PLATE
ICE CHUTE
COVER
CORNELIUS ED, DF AND DB series only
These dispensers require the installation of an ice diverter at the dispenser opening:
§ Disassemble chute assembly
§ Discard factory restrictor plate
§ Replace with alternate diverter plate (supplied)
Cornelius IDC and Flavor Fusion
These dispensers require modications for compatibility with Chewblet ice. Agitation times must be set to
1 second ON, 1 hour OFF and the ice restrictor plate must be adjusted to the fully open position. See your
beverage supplier for these modications.
Note: IDC and Flavor Fusion must be nugget-ready. Please contact beverage supplier for installation of ice slide.