Installation Instructions

HARMONY • RIDE Technology Horizon Elite 710/1010/1410
15
6.8 Potable Water Line 6.9 Cooling lines and power
➊
➊
➋
§ Insert potable water line into valve
➊
. § Connect cooling water lines to ice machine
➊
.
(Water "Out" connects to water regulator.)
§ Water valve is set at the factory. DO NOT remove
seal or adjust water valve
➋
.
6.10 Power cord 6.11 Plate
§ Remove twist tie.
§ Carefully pass cord thru opening and plug into wall
outlet.
§ For H_E units, install a suitable plug.
§ Position plate into opening and secure with
supplied screw.
WARNING!
Plate must be securely installed to ensure proper
equipment ground.