Spec Sheet

Self-contained 1010, 1410 series ice machine
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
7030‑202004 | © Follett LLC
Ice production – Horizon Elite 1010 series, 60 Hz,
air-cooled models
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32)
100 (38)
lb (kg) production in 24 hr
50 (10)
1160 (526) 1061 (481) 962 (436) 825 (374) 688 (312)
60 (16)
1093 (496) 1001 (454) 909 (412) 795 (361) 681 (309)
70 (21)
1026 (465) 941 (427) 857 (389) 765 (347) 674 (306)
80 (27)
971 (440) 893 (405) 815 (370) 730 (331) 644 (292)
90 (32)
917 (416) 941 (427) 773 (350) 694 (315) 614 (279)
Ice production – All Horizon Elite 1410 series,
air-cooled models
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32) 100 (38)
lb (kg) production in 24 hr
50 (10)
1593 (723) 1466 (665) 1339 (607) 1230 (558) 1121 (508)
60 (16)
1518 (689) 1396 (633) 1275 (579) 1163 (528) 1052 (478)
70 (21)
1442 (654) 1327 (602) 1211 (549) 1097 (498) 982 (446)
80 (27)
1394 (632) 1272 (577) 1150 (522) 1050 (477) 950 (431)
90 (32)
1345 (610) 1327 (602) 1089 (494) 1004 (456) 918 (417)
Ice production – All Horizon Elite 1410 series,
water-cooled models
Potable
water
temperature
F (C)
Condenser water temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32) 100 (38)
lb (kg) production in 24 hr
50 (10)
1436 (652) 1411 (641) 1385 (607) 1370 (622) 1354 (615)
60 (16)
1417 (643) 1367 (633) 1318 (621) 1307 (593) 1296 (588)
70 (21)
1397 (634) 1324 (602) 1251 (568) 1245 (565) 1238 (562)
80 (27)
1318 (598) 1253 (577) 1189 (540) 1170 (531) 1151 (522)
90 (32)
1238 (562) 1183 (602) 1127 (512) 1096 (497) 1064 (483)
Ice production – All Horizon Elite 1010 series,
water-cooled models
Potable
water
temperature
F (C)
Condenser water temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32) 100 (38)
lb (kg) production in 24 hr
50 (10)
1096 (498) 1043 (473) 1001 (454) 947 (430) 892 (405)
60 (16)
1006 (457) 970 (440) 938 (426) 888 (403) 839 (381)
70 (21)
917 (416) 898 (408) 874 (396) 830 (377) 786 (357)
80 (27)
874 (397) 826 (375) 826 (375) 787 (357) 749 (340)
90 (32)
831 (377) 778 (353) 778 (353) 745 (338) 712 (323)
Agion is a registered trademark of Sciessent LLC.
HORIZON ELITE, ICE•DEVICE, ICE MANAGER, MICRO CHEWBLET, SAFECLEAN PLUS, SANISPONGE, SYMPHONY PLUS and VISION are trademarks of FollettLLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
6 – Horizon Elite ice tube runs - specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
1/4"
1'
maximum
2' (60.9 cm)
beverage
dispenser
wall-mounted
ice machine
support
straps
transport tube slope
(toward ice machine)
(2 cm per meter)
minimum of
6.00" (15.24 cm)
turn/corner
radius
ice transport tube –
1 3/16" OD,
2 1/8" OD with insulation
Important specifier notes
1. 75' (22.9 m) maximum ice transport tuberun.
2. Tubing routing bends must have a
6.00"(15.24 cm) radius or larger.
3. Dips and traps are not allowed. If not
supported from underneath, secure insulated
ice transport tube at least every2' (60.9 cm)
to prevent drips andtraps.
4. Relative humidity levels above 80% in areas
where the ice machine or ice transport tube is
located may produce excessive condensation
that will cause water damage.
5.
Contact factory for recommendations on
running tubing through a decorative soffit
orchase.