Spec Sheet

7
Form# 7030
Self-contained 1010, 1410 series ice machine
4 – Horizon Elite ice machine mounting accessories
Optional wall mount bracket Optional machine stand Important specifier notes
22.00"
(55.9 cm)
25.50"
(64.8 cm)
30.50"
(77.7 cm)
13.00"
(33.0 cm)
21.00"
(53.3 cm)
6.88"
(17.50 cm)
A - 25.2" (64.0 cm)
B - 28.7" (72.9 cm)
A
B
1. For secure wall mounting, specify optional
wall mount bracket.
2. Wall and fasteners must support the weight
of the ice machine, bracket, supply water and
ice. Use of a backing board may be required
with hollow wall construction.
3. Machine stand mounting adds 6.88" (17.48cm)
to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward ice
machine and should be secured to prevent
dips and traps from forming.
5 – Horizon Elite drain - specifier guidelines
Flush drain plumbing – For regular machine drainage
Important specifier notes: Where code allows, follow
recommendation below.
➌
➊
3/4" barb x 3/4" FPT
1" Stand pipe/drain
2 ft x 1" OD
silicone tubing
Minimum 8"
radius
3/4" MPT x 1" slip
➋
1. Connect the silicone tubing to the ice machine 3/4"
drainbarb
➊.
2. Assemble the 3/4" barb x 3/4" FPT to the 3/4" MPT x
1" slip. Connect the other end of the silicone tubing to
the 3/4" barb
➋.
3. Connect the 1" slip fitting to the 1" stand pipe/drain
➌.
Note: Minimum 8" radius on silicone drain line. Drain line
from the ice machine must have at least 1/4" per foot
pitch (6.4 mm/0.3 m).
Note: Stand pipe/drain provided by others. All other
components provided with ice machine.
Chassis drain plumbing – To assist with condensate in high humidity areas
Important specifier notes: Where code allows, follow
recommendation below.
1. Plug must be removed from John Guest fitting.
2. Route 3/8" drain tubing through knockout in back of
docking station and insert fully into John Guest fitting
connection at the rear of the machine chassis. Route
other end of 3/8" drain tubing to drain.
3. Drain must slope 1/4" inch per foot ( 6 mm per 30.4 cm).