Installation Instructions

16
self-contained Cornelius • RIDE Technology
• Position plate into opening and secure
with supplied screw
Power cord
8.11
• Remove twist tie
• Carefully pass cord thru opening and plug
into wall outlet
Power cord
8.10
NOTICE
Ice machine MUST be sanitized prior to operation!
Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
CLEANER FULL DRAIN CLOG HIGH PRES HIGH AMPS
SERVICE MAINT/CLEAN LOW WATER TIME DELAY SLEEP CYCLE MAKING ICE LOW BIN POWER ON
CLEAN
TDS
HIGH
LOW
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW: for low-scale water
TDS switch
8.12
➊
➋
• Connect cooling water lines to ice
machine
(Water "Out" connects to water
regulator.)
➊
• Water valve is set at the factory. DO NOT
remove seal or adjust water valve
➋
Cooling lines and power
8.9