Installation Instructions

6
Horizon 710/1010/1410 BIN • TOP-MOUNT
3. Louvered Docking Assembly Installation
WARNING!
§ Prior to installing the louvered docking assembly, ensure that the drain tting is oriented (right or left) correctly
for your installation. An optional straight drain tting is also supplied. You may need to remove the back panel
of the docking assembly in order to re-orient or change the drain tting. Replace back panel prior to mounting
the docking assembly.
§ Docking station must be secured in accordance with these instructions to ensure ice machine stability.
§ Ventilation openings in the louvered docking station should be clear of obstruction. Failure to do so could
result in damage to equipment.
§ Plug must be accessible after nal installation.
➋
➊
➌
➊
§ Remove protective tape from gaskets.
§ Apply gaskets
➊
.
§ Install shuttle actuator
➋
through dispenser top
and secure with locking nut
➌
.
§ Mount louvered docking assembly using two screws
provided.