Manualshelf

Installation Instructions

ManualsBrandsFollett ManualsCommercial Equipment30" Horizon Elite Series Air Condenser Ice Machine with 1061 lbs. Daily Ice Production, Chewblet Ice, and Agion Silver-Based Antimicrobial in Stainless Steel
3456789101112
BIN • TOP-MOUNT Horizon 710/1010/1410
11
5.9 Cooling lines and power 5.10 Power cord
➊
➋
§ Connect cooling water lines to ice machine
➊
.
(Water "Out" connects to water regulator.)
§ Water valve is set at the factory. DO NOT remove
seal or adjust water valve
➋
.
§ Remove twist tie.
§ Carefully pass plug thru opening and plug into
wall outlet.
§ For H_E units, install a suitable plug.
5.11 Plate 5.12 TDS switch
CLEANER FULL
DRAIN CLOG
HIGH PRES
HIGH AMPS
SERVICE
MAINT/CLEAN
LOW WATER
TIME DELAY
SLEEP CYCLE
MAKING ICE
LOW BIN
POWER ON
CLEAN
TDS
HIGH
LOW
§ Position plate into opening and secure with supplied
screw.
WARNING!
Plate must be securely installed to ensure proper
equipment ground.
§ Set the TDS switch on the elctrical box.
– HIGH: for extended service life
– LOW: for low-scale water