Installation Instructions

10
Horizon 710/1010/1410 BIN • TOP-MOUNT
5.5 TDS switch 5.6 Cooling Lines
CLEANER FULL DRAIN CLOG HIGH PRES HIGH AMPS SERVICE
MAINT/CLEAN LOW WATER TIME DELAY SLEEP CYCLE MAKING ICE LOW BIN POWER ON
CLEAN
TDS
HIGH
LOW
In
Out
§ Set the TDS switch on the elctrical box.
– HIGH: for extended service life
– LOW: for low-scale water
§ Install ice machine cooling water lines to louvered
docking assembly.
5.7 Ice transport tube 5.8 Potable Water Line
➊
➋
➊
§ Slide ice machine into louvered docking
assembly ensuring that drain tube is fully
seated on barbed drain tting
➊
.
§ Insert ice transport tube into coupling and tighten
nut rmly ➋.
§ Insert potable water line into valve
➊
.