Owners Manual

17
Totes ice carrier for low-prole Ice•DevIce unit
Assembly
The Totes ice carrier requires no assembly.
Operation
1. The polyethylene construction of the ice carrier makes it light and
very resistant to damage from normal use.
2. The handle makes it convenient to transport up to 25 lbs (11.34kg)
of ice and the shape of the ice carrier makes pouring easy.
Filling Totes ice carrier
1. Position ice carrier under ice chute.
2. Open lift door and conrm there is enough ice in hopper area.
(If not, see previous sections on “adjusting SmartGATE” and “using
tools”.)
3. Pull ice chute gate up to start ow of ice into ice carrier.
4. When ice carrier is almost full, push chute gate down to stop ow. (Some ice will continue to fall as chute
gate closes. Leave room in ice carrier for this in-ight ice to avoid spillage.)
5. Close lift door and carry ice carrier to usage area.
The polyethylene ice carrier should be cleaned and sanitized periodically with any product suitable for use in a
food zone. DO NOT RUN ICE CARRIER THROUGH A DISHWASHER.
Note: If you purchased a SmartCART 75 for use with your low-prole Ice•DevIce, see pages 11 and 12 for
assembly, operation and cleaning instructions.