Owners Manual

11
Using tools
Two tools — a paddle and a rake — ship with the Ice•DevIce and should be mounted for
easy access on either side of the bin in the bracket provided.
Using paddle
If there is adequate ice in Ice•DevIce but hopper is not lled with ice, it may be that
ice has congealed behind SmartGATE and cannot ow into hopper. This can often be
remedied by simply opening and closing SmartGATE several times (see adjusting
SmartGATE, above.) If problem continues, the paddle can be inserted through rectangular
openings in SmartGATE and moved back and forth to break bridge.
Using rake
When Ice•DevIce is almost empty of ice, there will not be enough ice piled in hopper area
to allow chute to work. In this case, rake can be used to pull ice forward into hopper area.
Cleaning Ice•DevIce
Exterior care
The stainless steel exterior of the bin can be cleaned with a stainless cleaner such as 3M* Stainless Steel
Cleaner & Polish or equivalent.
Interior care
The polyethylene liner should be cleaned and sanitized periodically with any product suitable for use in a food
zone.
Technical assistance available toll free
Should you have any questions concerning the installation or maintenance of Follett ice storage bins, please call
our technical service department at [phone] or [phone] between 8 a.m. and 5 p.m. Eastern
time.
* 3M is a trademark of 3M Company.
Interior of bin must be cleaned and sanitized prior to use. A regular schedule of cleaning
maintenance is recommended following installation to ensure cleanliness of delivered ice.
!
Use tools only as described. To avoid possible injury, keep head and face clear of hopper area
and tools at all times. Do not use tools for other purposes.
!