Owners Manual

12
Assembly, operation and cleaning of Ice•DevIce carts and accessories
The following assembly, operation and cleaning instructions have been divided into ve parts. Use the section
pertaining to the carts and accessories purchased with your Ice•DevIce unit.
SmartCART 75
Assembly
1. Remove installation hardware from poly bag taped to Totes ice carrier.
2. Place cart handle ends along holes at the back of cart base. Align handle end holes with small holes in
sides of cart.
3. Tighten bolts securely.
4. Position lid onto cart in between handles. From outside cart
handle, insert 1.5" pivot pins through handle and lid bushings.
5. Push down on L-shaped cart drain handle and conrm that it seats
in hole in cart bottom.
6. Arrange plastic Totes ice carriers in cart (longer dimension parallel
with cart handle) and check that lid clears ice carriers when in
down position.
Operation
1. A cart drain allows any melt water or cleaning solutions to be
drained easily from cart. (Fig. 1)
Each Totes ice carrier holds approximately 25lbs (11.34kg) of ice
(Fig. 3).
2. The three-wheeled cart maneuvers easily in limited space, can be
turned tightly and goes up and down different oor levels without
difficulty (Fig. 2).
3. Molded base protect xtures and walls.
Use cart only for transport of ice. To avoid possible injury, do not ride in or on cart.
Do not use cart to transport other items.
!
Pull up on drain handle to
open. Push down to close.
Tip cart onto back wheels
to go up or down different
oor levels.
Lift Totes ice carrier
straight up from cart
and return to cart when
empty.
Fig. 1 – Drain
Fig. 2 – Uneven ooring
Fig. 3 – Lift ice carrier