Owners Manual

7CI100A/7FS100A, 15CI100A/15FS100A 21
11. Use screwdriver to orient auger shaft to align with motor
shaft keyway (Fig. 29.1).
12. Install key into keyway (Fig. 29.2).
Fig. 29
1
2
3
13. Install spacer, ensure that key is captured in slot
(Fig.30.1)
Fig. 30
1
14. Insert screwdriver into groove of auger shaft and pry shaft
outwards (Fig.31.1).
15. Insert retainer into groove (Fig.31.2), ensure that retainer
is aligned with hole in spacer.
Fig. 31
1
2