Owners Manual

110CT425A/W, 110FB425A/W 23
6. Slip supplied hose clamp on opposite end of new ice transport tube. Place end of tube in cup of hot
water to soften and spread with pliers to ease assembly and prevent coupler edge from cutting inner wall
of tube (Fig 7).
Fig. 7
Hot Water
160 F (71 C)
7. Carefully push tube onto icemaker. Do not twist hose when securing to evaporator.
Note: Only use tubing supplied by Follett Corporation.
8. Fasten tube on port with hose clamp, ensure that clamp is positioned on evaporator side of nozzle ange.
9. Tighten clamp.
Thermostat replacement
well nut
ice level
control stat
rubber grommet
control box assembly
hopper assembly
knurled screw
bin thermostat
control box assembly
ice level control stat
ice mounting hose bracket