Owners Manual
ManualsBrandsFollett ManualsCommercial Countertop Ice Makers and Dispensers110CT425A-S 25" Symphony Plus Series Air-Cooled Condenser Countertop Ice and Water Dispenser with 425 lbs. Daily Ice Production, 90 lbs. Storage Capacity, Chewblet Ice and Agion Silver-Based Antimicrobial Protection in Stainless Steel
22 110CT425A/W, 110FB425A/W
Ice transport tube replacement – Top mount units
Models 110CT425A/W
CAUTION!
§ Use only tubing supplied by Follett Corporation.
Tighten clamp
screw
1.00" (2.54 cm)
2
1
3
Ice transport tube replacement – Freestanding units
Models 110FB425A/W
1. Remove top and rear access panel from dispenser (lower front panel in freestanding unit).
2. Disconnect existing ice tube from engaging pin on transport tube bracket in ice storage bin and pull down
through dispenser chase.
3. Disconnect opposite end of tube from ice machine.
4. Run end of new ice transport tube with 3/16" (5 mm) hole through internal chase in rear inside corner of
dispenser (left side as you face dispenser) and push up into storage area.
5. Push the 3/16" (5 mm) hole near end of tube into pin on ice tube bracket (Fig 6).
Fig. 6
A
A
1.00"
(2.54 cm)
Section A – A
3/16" (5 mm)
dia. hole
engaging pin
3/16" (5 mm) ice tube hole
ice hose mounting bracket
ice level control stat
ice tube
1.00"
(2.54 cm)