Installation Instructions

00986109R00
10/11
801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com
Follett is a registered trademark of Follett Corporation, registered in US.
15. Place end of tube attached
to head assembly into 3.5
gallon capacity bucket
(Fig.5.1).
16. Locate screw at head
assembly drain valve
(Fig.5.2) and turn clockwise
to open drain valve.
17. Turn on water supply and
run 3 gallons of water
through Claris  lter into
bucket.
18. Turn head assembly drain
valve screw (Fig.5.2)
counterclockwise to close
drain valve.
Fig. 5
3.5 Gallon
Bucket
1
Filter
Closed
Open
2
19. Lift bypass select knob
(Fig. 6.1) and turn to set
the appropriate  lter bypass
level (Fig. 6.2) for your
application.
20. Sanitize the dispenser
prior to use (refer to the
Installation, Operation and
Service Manual shipped with
the dispenser).
Fig. 6
1
2
Contact Follett for additional information if your water conditions are outside
these parameters.