Installation Instructions

Claris Filter for 7 Series Dispensers 3
10. Disconnect water tube
at T- tting (Fig.3.1) and
connect elbow  tting to water
tube (Fig.3.2).
Fig. 3
Water
Reservoir
Water Solenoid Valve
(optional)
Water
Supply
Water Chute
(optional)
2
1
11. Place bushings in two hole
locations in back panel
(Fig.4.1).
12. Cut 5 ft. of tubing and
connect one end to Claris
'water in' (Fig.4.2).
13. Run tubing through bottom
bushing and connect to
T-  tting (Fig.4.3).
14. Cut 5 ft. of tubing and
connect one end to Claris
'water out' (Fig.4.4), run
tubing through top bushing
and connect to elbow  tting
(Fig.4.5).
Fig. 4
Filter
4
1
2
1
5
3