Installation Instructions

2 Claris Filter for 7 Series Dispensers

3. Press and hold the maintenance/clean switch (Fig. 2.1)

until

displays in the user interface (Fig. 2.2).

4. Remove (unscrew) chrome ice dispenser chute (Fig. 2.3).

5. Remove the drip tray (Fig. 2.4).

6. Remove the two screws (Fig. 2.5) on the front panel

(behind the drip tray).

7. Remove and set aside the front panel (Fig. 2.6) - do not

disengage the plug on the back of the User Interface

or the tubing at the water dispenser chute (if so

equipped).

8. Lift and remove the top panel, set aside (Fig.2.7).

9. Remove two screws (Fig. 2.8) and remove left side panel.

Fig. 2