User Guide

Enter
Auto
i
C
Esc
Enter
1
2
3
6
5
4
7
8
9
0
15
14
16
13
QUICK START GUIDE
Automatic Calf Feeder - 1.12 Recommissioning
First settings at the Handheld
Fill the heat exchanger
Fault message HE not lled is automatically displayed
press HE is lled now
Enter basic settings (date & time)
ESC
= back
ENTER
= conrm
Calibration
Calibrate all existing components at least 3 times during initial commissioning.
calibration Components
Water, MP, milk, additives, detergent
TIPP: check QuickStartGuide 1.3 & 1.4 Calibration
Attention: detergent quantity is set to 0ml by default
TIPP: check QuickStartGuide 1.6 & 1.7 Cleaning
Cleaning before recommissioning
Check cleaning settings
Cleaning
Start circuit cleaning
Cleaning
settings
circuit cleaning
start?
This checklist refers to the basic equipment of the calf feeder. Not all available functions of the automatic feeder or the extensions can be shown.
For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 23/02)
After cleaning, check all components
again for leaks.