User Manual

5
1. Headphone Level Pot
Controls the volume level sent to the stereo headphone jack.
2. Local Input Gain Encoders
Independent gain controls for the Local inputs on Combo connectors 1 and 2.
Either encoder’s control can be applied to both channels using the LINK function; see next page.
3. Local Input Function Switches
Two sets of function switches for Local Inputs 1 and 2:
• 48V – Enables 48V phantom power on the XLR input.
• Ø (Phase) – Enables phase reverse
• HPF – Enables 80Hz high pass filter
• AIR – Changes the input characteristics to Air mode. See page 17 for further information
4. Input Mix Pot
Adjusts the level balance between the Network and the Local input signals. The mix signal
can be smoothly varied between fully Network and fully Local using the pot. This mix signal is
always sent to the headphone socket.
5. Headphone Socket
Standard 1/4” stereo jack for headphones.
6. Line Output Level Pot
Controls the volume level sent to the Line Output XLRs.
INSTALLATION GUIDE
RedNet X2P Connections and Features
Top Panel
1
4
3
2
5
6
7
8
9