User Manual

Notes:

- The default is “Off”

- 16 channels are available, allowing a maximum of 16 independent RedNet X2P control paths

- Two devices should not be set to the same MIDI channel

- MIDI channel selection is saved with the computer, not the device. Therefore, when controlling the same unit from a

different computer, the MIDI channel allocation may no longer be the same

For more information, please download the MIDI Control User Guide from www.focusrite.com

Input Mix Mono/Stereo – Assigns the operating mode for the Local preamp inputs:

• ‘Auto’ – The mode is determined by the Link switch setting:

° Link switch, On: Stereo

° Link switch, Off: Mono-Summed

• Stereo (Always)

• Mono Summed (Always)

Front Panel Lockout – On/Off state.

Front Panel Lockout Options – Selects which controls are affected when Lockout is active:

• Preamp Control

• Line Out Control

Tools Menu . . . Continued