User Manual

11
REDNET X2P OPERATION
First Use and Firmware Updates
Your RedNet X2P may require a firmware update* when it is first installed and switched on. Firmware
updates are initiated and handled automatically by the RedNet Control application.
*It is important that the rmware update procedure is not interrupted – either by switching off power to the
RedNet X2P or the computer on which RedNet Control is running, or by disconnecting either from the network.
From time to time Focusrite will release RedNet firmware updates within new versions of RedNet
Control. We recommend keeping all RedNet units up to date with the latest firmware version supplied
with each new version of RedNet Control.
The RedNet Control application will automatically inform the user if there is a rmware update available.
Digital Clocking
Each RedNet X2P will automatically lock to a valid Network Master via its Dante connection.
Alternatively, if a Network Master is not already present, the unit can be chosen as the Network
Master by the user.
Pull Up and Pull Down Operation
RedNet X2P is able to operate at a specified pull up or pull down percentage as selected in the Dante
Controller application (Dante Ultimo capability):
• 44.1 kHz
• 48 kHz
• 88.2 kHz
• 96 kHz
• Pull Up/Down:
° -4%
° -0.1%
° 0%
° +0.1%
° +4.1667%