User Manual

8
•
LED bargraph channel metering which can follow either
channel input, channel output or DAW channels as provided
from the control surface
•
 Channel1-8‘unity’functionforquicksetupifmixing‘inthe
box’ but summing via Control 2802
•
Stereo cue with alternative input functionality to expand
number of channel inputs from 8 to 16
•
Flexible cue section with summed source selection, built-
in talkback communications with provision for an external
talkback microphone and 48V phantom power if desired
•
Fully featured eight-fader HUI
TM
based control surface with
jog/shuttlewheel,transportpanel,4rotaryencodersand
OLED channel display
•
On-board VCA bus compressor with wet/dry blend and
patchable inputs / outputs
•
Two Stereo FX returns with mono mode, balance and level
controls, plus routing to either cue or mix bus
•
Eight channel summing input (4 stereo pairs) with mono mode,
balance and level controls plus routing to either cue or mix bus
•
Fully featured monitor section with source selection, including
i-jackfrontpanelinput.Monitorsectionincludesmono,polarity
reverse, cut left, cut right, dim, volume and speaker selection
•
ALPS 100mm faders (channels are motorized and master
fader is manual)
•
i-Jack consumer level front panel monitor input for MP3
players etc
•
Solo-in-front
•
Solo-in-place
•
Solo safe
•
Channel automation safe function
•
Attractive black livery
•
Internal passively cooled power supply
•
Focusrite Dual Layer Technology
Operational Surface Overview