User Manual
6
Rack Mounted Ventilation
The console can also be rack mounted with the rack ear kit and
will occupy 13RU plus connector space (suggest 15RU total) –
please ensure that these ventilation holes are not restricted.
A vented 19” blanking plate is recommended to cover the
connectorspace,providingadequateairowtothetop
ventilation plate.
Power Up
On power up, please check that the power rail indicators
for +48v d.c and +/-18v d.c light on the top right hand side
of the console.
Lexan Overlay
The front panel at the top of Control 2802 (dark section only)
features a rugged under-surface printed polycarbonate overlay.
Exposure to direct sunlight for extended periods of time should
be avoided as this can have a detrimental effect on the overlay
panel and the control knobs.
Optional Rack Ear Kit - Installation
Remove screws from side trim, position rack wing and
replace screws.
Ifrequired,usesecondrowofrackwingholestoposition
theconsolesurfaceushwiththerackframe
Control 2802 Dimensions (including
rubber feet)
Height Front – 60 mm
Height Rear – 170 mm
Width – 450 mm
Depth – 550 mm
Height (depth) when racked 13RU plus connector space 15RU