User Manual

46
Power the console on and once booted, check that a connection
has been opened in the Network Connections window via the
Control Panel.
Moving across to the Control 2802, press the SETUP button.
TheOLEDdisplayswillshowtherstpageofconsolesetup.
First set the application you are using with Control 2802. The
options for PC at the time of release include:
•
Avid Pro Tools 8
•
Steinberg Cubase 5 (Nuendo)
UsetherstrotaryencodertoselecttherequiredDAWapplication.
Note that once a change has been made, the setup switch LED
willashtoindicatethatasettinghaschanged.
If you exit setup by pressing the switch once more and then
return by entering setup again, you will notice that your setting
has been automatically saved.
Using the page keys, page to the right and ensure that Use
DHCP is set to NO. Page right again to reach the IP address
screen and set the IP address to 192.168.0.100 (default) using
the encoders, then move to the fourth page, and check that the
subnet mask is set to 255.255.255.0.
Subnet Mask set to 255.255.255.0: