Operation Manual

4
System Requirements
IMPORTANT
Please visit the following link for up-to-date information on computer and operating
system compatibility for Focusrite Control and all Clarett products:
www.focusrite.com/clarett/compatibility
Software Installation
Focusrite Control is available for download from the Focusrite website (www.focusrite.com/register).
The Getting Started Guide provided with your Clarett hardware contains validation codes which you
will need to enter at the above web address. This procedure ensures that you will have the most
up-to-date software versions.
1. Using your usual browser, go to www.focusrite.com/register.
2. Follow the on-screen instructions, entering the “Bundle Code” into the form where prompted.
Your Bundle Code can be found on the back of the Getting Started Guide packed with the
Clarett interface.
3. Enter the unit’s serial number, which can also be found on the back of the Getting Started
Guide.
4. You will then be able to access the “My Products” page, where Focusrite Control is available
for download, complete with activation codes where applicable.
5. Download and install Focusrite Control, which contains the necessary drivers for your
interface. Follow all on-screen instructions.
6. When the installation is complete, you will be prompted to restart your computer.
7. After a restart, connect the Clarett interface to your computer with a Thunderbolt cable.